2002 Cadillac Deville "seat cushion heat back" Questions

...seat cushion. You have to pull the seat cushion up and then pull back the carpeting to get to them. Check the appropriate fuse and replace if necessary. If it's not a blown fuse then you have a short ...

...seat cushion heating element • Left seat back heating element • Left seat cushion temperature sensor • Right seat cushion heating element • Right seat back heating element • Right seat cushion ...

seat cushion and seat back heat, or seat back only heat. When a heated seat temperature signal request is received, the MSM will activate both the seat cushion and seat back heating elements. When the

...seat cushion and seat back to the seat's occupant. In order for the CCS system to operate to its optimum performance, it is crucial to have unrestricted air flow through the system. A dirty or ...

...seat cushion or seat back is open.It leaves the module and goes to the seat back on the YE/LB wire thru the seat back and leaves there on the GY/LB wire and goes to the seat cushion and leaves there ...

...on cushion or seat back. You can check them with an ohm meter. Usually it is the element in the cushion that goes bad. You can get the element seperately but cover has to be removed to replace

...seat cushion button 1 time will activate the seat back and cushion heater elements in the high mode. Each time the seat cushion button is pressed the seat back and cushion heat level is reduced from ...

...seat cushion heater elements • Driver and passenger seat back temperature sensors • Driver seat module • Driver door module • Passenger door module When there are modules involved in the operation of ...

...seat not working, but the back heated cushion is working normally. The lights for the seat warmers in both activation switches are illuminated when selected. It sounds like the heating element is ...

...seat cushion or seat back. You can check them with an ohm meter. The plugs will be under the seat near the inside seat hindge. The cushion will come in on the YE/LB wire and leave on the GY/LB,then ...