1998 Cadillac Catera "cost changing tie rods" Questions

... before you get an alignment your probably gonna want 2 replace the control arm bushings first and check the tie rods, the 4 bushings cost me almost $400 from dealer plus you gotta have them pressed ...

...you have installed tie-rod end. if in doubt you can go to any auto parts store and buy a haynes manual for your vehicle, they are based on a complete vehicle teardown. the cost is only about

...changing the inner tie rod on a 2000 cirrus with a 2.5 and cant figure out how to get old one off to get the inner tie rod out you need an inner tie rod tool, it's a long tube that fits a 1/2 inch ...

...cost anywhere from 20 to 40 dollars apiece plus labor costs. Hopefully your bill does not exceed 150 dollars. Once they tie rods ends are pulled they will need to get re aligned on the steering rack ...

...I had my outer tie rod end go bad in my 2002 lancer oz and i just bought the pairs and took it in and it total cost me 200. but could be less. I would take it in to a tire shop. that's what i

...cost is around $80.00 for a good 4 wheel alignment and $55.00 for a front wheel alignment. Price may vary on to where you live. Good luck and hope this helps.  It does sound like a tie rod ...

Changing inner tie rods on 2005 Chrysler 300c I was told that you need two tools to change the inner tie rods on my 2005 Chrysler 300c hemi, and that there is a pin that has to be removed. They said ...

...specific tie rods. Use grease gun to lubricate the new end. It's recommended that you take it for an alignment. If you're not sure what I'm talking about, take it to a shop. Shouldn't cost much to

tie rods. so if it's like 50 more for the whole assembly, i would but if not, it's up to you. i've changed some rack and pinions on vechiles that were under 150000 due to major leaking. and if you put

...tie rod broken, and it doesnt seem that hard. But looks can be deceiving~ before I get into it, thought I might get some advice. What might this cost in a repair shop? you need to remove the nut ...