1994 Cadillac Fleetwood "match passkeys" Questions

94 caddy passkey system how to bypass you must oohm out key and get resister to match the one mounted in key and then install inline to white wires that go up to key cylinder.

of 3 cycles or 30 minutes. I thought, maybe I don't have the master passkey??? All three parts must match. The key, the ignition, and the tdm. If you replaced with a different one, and they dont match

jeremy w I was trying to install a passkey III immobilizer and need to hook to the fuel anable between passkey and e c m The oem pass key system reads the key and compares that to what the computer is

1999 Intrigue Olds mobile, the security light stays on, and doesn't flash. The car will not start. Replaced the ignition switch and the passkey case Did you have a new key cut using a blank that ...

...shut off......any connection? Anyone? Yes your car can stop running (die) if the passkey does not match. Sounds like there may be an issue with the sensor in the key module. Do you receive any

...it how do I reset this or what wire do I cut The most common cause is the chip in the key does not match the security code, or the security module has failed. The chip in the key must match the ...

is the resistor for the security system. The ignition reads that bump and if the resistance doesn't match, it won't start

go out after leaving the ke Passkey 3 system This is definitely the security system. It now doesn't match your computer. It must be bypassed or replaced. Best way for the money is to bypass. Here is a

...problem. The problem will lie with the pellet in the key and knowing what resistance is needed to match up with the body control module, which will allow the car to start. I assume that sometimes ...

...stored in the IPC's memory. The IPC then performs one of the following functions: • If the values match, the IPC performs the following (system enable) functions: - Provides a ground for the