1989 Cadillac Sedan DeVille "flair parts" Questions

...put several clamps on and locate screw parts 180 degrees from adjacent clamp. (sometimes slightly flairing the end of the metal line very slightly will keep hose from sliding

parts store said I need to know weather it has flair or gaskit fitting it does not say in the book.He also asked what size engine and the book in the car does not state that either. 1.8 or 1.6 engine.

ford flaire sides what is the part the ataches the gear shift to the stiering whell what part are you looking for

...parts store. You cut,bend,and flair the ends yourself,fabricate so to speak, no other way. You use only the 3/16 double flair connectors, if you can not make an end to end run. You start by removing ...

...parts store and reuse the ends off your old brake line. Run the line out under your truck, cut it to length, put the end on up by the master cylinder first and get the good zip ties and tie it up ...

how do you replace brake lines on a 95 ford e350? Buy the brake tubing you need at the auto parts store Cut,bend & flair the ends Fabrication job,just replace what is there & rusted out

flair rv? Had to replace ignition because keys were misplaced, had to remove steering wheel and a washer and pin got lost, can I replace the whole thing you can order the parts---change steering wheel

...parts store,and fabricate what your replacing. Have to know, how to bend and flair tubing, and have the necessary tools. do you know which line on the master cylender goes to the front passenger

knock sensor 1.3 1998 fiesta flair endura knock sensor part number Sorry we do not have part numbers for anything here. No books or software to look them up. Try an online auto parts site.

...flair nut wrenches, a tube bender, and brake fluid-once you remove the damaged tube, take it to a parts store to get the proper diameter tube, and fittings. use the old tubes as a pattern to bend the ...