1989 Cadillac Eldorado "change oil pump drive shaft" Questions

change oil light still on after oil has been changed no or very low pressure, check for broken oil pump and drive shaft

change a oil pump how do you change an oil pump This is straight from the book. 1. Remove oil pan. 2. Place large drain pan under engine 3. Unbolt the pump and exstension shaft from the rear main cap.

oil pump still no oil pressure put pump back in minus dist shaft and spun pump with drill nothing You either are not engaging the oil pump drive, did you reinstall oil pick-up tube and you are running

...change the 6th oil pump . this one lasted 10 miles 1995 Ford E250 4.9l . I've got to change the 6th oil pump . this one lasted 10 miles There are only a few things to check. I do not have a ...

...both the distributor and the oil pump. The oil pan will need to be removed to access it. Once the oil pan is off the oil pump is easy to change, although a messy job. Thank you for using FixYa. ...

change. You need to remove the oil pressure sender by the oil filter and put a manual gauge in to see what your oil pressure actually is. The oil pump is fairly easy to replace, just drain out the oil

...change the oil pump of a ford ranger 1993 You didn't post your engine size so please pick the one that works for you....I'll post them all separately: 2.3L EngineThe oil pumps are not serviceable. If ...

...oil pump, but most likely it does. The light came on because the oil pump is being turned and with no oil pressure the valve lifters are not pumped up. On the bottom of the distributor shaft there ...

oil pump failure of 2.0 TDI engines ! Remove the oil pan and the oil pump & balancer shafts assembly. Either the shaft driving the pump from the balance shaft rounds off or the balance shaft drive

...oil pump is brand new? I have already changed the oil pump and 2 of the rod bearings. What other problem could cause there to be no oil pressure? did you check the oil pressure senser that controls ...