1988 Cadillac Eldorado "vehicle need running bleed brakes" Questions

Ad

Question about Cadillac Eldorado

1 Answer

need to know how ? or there is brake fluid coming from the vehicles brakes ? Brake bleeding is easier to accomplish with two people. Have one person pump the brakes until there is a back pressure felt

Ad

Question about Cadillac Eldorado

1 Answer

...vehicle and have some one pump the brakes then hold down and open bleeder valve. You need to do this several times with ABS brakes,make sure you continue to check master cylinder fluid level ...

Ad

Question about Cadillac Eldorado

1 Answer

...need to have the vehicle running , just bleed the brakes normally . If you have replaced the Electro-Hydraulic Control Unit you need a factory scan tool to cycle the unit solenoids Important: • Use ...

Question about Cadillac Eldorado

2 Answers

...Need a helper in the car to press the brake pedal,while you open & close the bleeder valves,starting at the RR The bench bleed is a mess & a waste of time. You walk to the vehicle the fluid ...

Question about Cadillac Eldorado

2 Answers

...need to pump the pedal a bit to bring the new pads into contact with the rotors. You may also have a bubble in the ABS system. There is a special procedure using an ABS scan tool: Bleeding Procedure ...

Question about Cadillac Eldorado

1 Answer

...need to bleed your brakes the ABS light should go out by itself if this is done unless their is a ABS problem.Remeber when you bleed brakes that have ABS you must have the vehicle running when you ...

vehicle and make sure it is blocked. With the engine running perform system bleeds on all four calipers. Pump 3 times then release bleed valve. You are going to need a couple bottles of brake fluid to

...Brakes:** - Lower the vehicle, tighten the lug nuts, and then fully tighten them in a crisscross pattern. - Test the brakes to ensure they feel firm and responsive. Bleeding the brake system is an ...

Question about Cadillac Eldorado

1 Answer

...bleed procedure below. Raise and support the vehicle. Remove the tire and wheel assemblies. Inspect the battery state of charge. Install a scan tool. Turn ON the ignition, with the engine OFF. With ...

...need a scantool that can activate the automated ABS bleed and a pressure bleeding system. To bleed the brakes use the standard pattern of RR,LR,RF,LF ABS Automated Bleed Procedure Caution: Refer to ...

Not finding what you are looking for?
Cars & Trucks Logo

114 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...