2003 Acura 3.2TL "replace bad torque converter" Questions

bad when hot replace the sensor and the harness. before you condemm the computer. blinking d5 light suggests signs of tranny failure get it checked out!! these cars have alot of transmission issues. i

...Replace The sensor is threaded into the exhaust manifold.It can be difficult to remove unless a special anti-seize compound is coated onto its threads.Torque the sensor to 30 foot-pounds using a ...

...trans combo,,just bad torque converters,,we never had a trans issue ,,,you only need the converter I just replaced a tranny in this customer got no break take what you can you are over the ...

...bad. But if your going to replace the torque converter you might as well make sure you have a good transmission because you have to drop the transmission to get to the torque converter. No point in ...

...bad vibration. Had plugs changed, still vibration. Called transmission man back and he said the converter may be out of balance. Have u heard of this happening before? Hello Carl, Yes, I have seen ...

bad. make sure you hear two tumps or steps and you cant put your fingers betwen converter and trans case. if all of this is Ok, then your oil pump is locked or broken, you wiil need a rebuilder to fix

...the only thing turning in tranny is torque converter. had same trbl with an impala once. The torque converter is bad and the flex plate may be cracked around the crank flange. I would replace

...converter is bad. Car stalls after hiway Torque converter is bad. Car stalls after hiway driving. Today it stalled in the city after sitting all day. How much to replace? 500.00 to 1,200.00 ...

...itself is worn, damaged or otherwise "bad", the only Way to remedy it is to replace the converter. No pour in "transmission fix" product will make any difference and the converter isn't

...bad but I have no idea where this is or how to replace it. these cars have a major issue with torque converters.... the torque converter input splines are softer than the splines on the input shaft ...