1997 Acura CL "vtech engine" Questions

Ad

Question about Acura CL

1 Answer

...vtech with 156,000 miles. its slipping bad in 4D. the engine light came on and the D4 light started blinking. then the car would not go, so i disconnected the negative on the battery and reset the ...

Ad

...engine light on reading code P2646, rocker arm actuator a bank 1 perf or stuck off? the actuator is faulty and you could clean it, reset ECU error and check again P2646 could also be "VTECH oil ...

Ad

...VTECH engine on a Honda accord I would say it is possible, just check what models were available within your series, they normally have same body, and vary between 1500 cc upwards, so that would ...

i have a1990 honda accord ex that had a 2.2 non vtech i put a 1994 vtech motor in my car an i need the vacuum hose diagram if possible that is tricky since the VTEC has a totally different system, ...

Question about Acura CL

1 Answer

vtech is suppose to come on the car tops out. I would also imagine that there is a check engine light on. The oil pressure switch will cuase this. Real easy to change and the most likely. I would have

Question about Acura CL

1 Answer

...VTECH ENGINE HAS PROBLEM WITH VTEC SOLENOID OR VTEC OIL PRESSURE SWITCH.MOST TIME CHECK THE OIL PRESSURE BY REMOVING VTEC OIL PRESSURE SWITCH FROM THE LOCK UP SOLENOID AND CONNECT AN ADAPTER BETWEEN ...

couldnt be that that its my vtech solenoid can anyone help me??? The oil light sensor in the back of the engine around where the oil filter is located, and also check if the wire was not plug in tight

...engine. As for the idle problem its probably a tps sensor and if it idles really low rpms you should up the idle at the trottle body to idle at 800 rpms to be safe, To low of a idle will cause ...

Question about Acura CL

1 Answer

...loud noise,please help. You did not mention what engine you have, but on the vtech engines, the valve noise is usually a result of a worn camshaft and lifters. No adjustment will make it any

vtech putting my car at tdc when the marks line up the rotor points just below the #1 spark plug whats wrong how do i fix This is exactly the way it is supposed to be. The spark virtually never occurs

Not finding what you are looking for?
1997 Acura CL Logo

578 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Acura 3.2CL
2001 Acura 3.2CL

227 Questions

1998 Acura CL
1998 Acura CL

159 Questions

1999 Acura CL
1999 Acura CL

156 Questions

2003 Acura 3.2CL
2003 Acura 3.2CL

50 Questions

2004 Acura 3.2CL
2004 Acura 3.2CL

10 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...