1997 Acura CL "replace timing belt start" Questions

...replace timing belts now starts will not idle You're timing marks must be off. If the marks on the gears aren't perfectly aligned, it just won't run right. Take off the cover and make sure that when ...

vauxhall vectra 1999 gls is mis-firing engine is turning,does not start,mis-firing. timing belt need's replaced

Replace the Acura parts in the opposite order of removal. Note the labels you placed on each component. Install and reconnect the exhaust manifold, timing belt covers, crankshaft pulley, water passage

...replace a timing belt That is best suited for a reputable repair shop. If the timing belt snapped and left the car not able to start, that's even more of a problem. Steps: Unbolt the engine mount ...

...timing belt components do not.timing belt is not broke.what next? Either the belt is missing teeth or the cam is broken timing belt broke replace it car starts but put it on drive doesnt run starts ...

...timing belt? it may have JUMPED time due to a loose or worn timing belt.if the engine has 90.000 miles and the timing belts not been replaced,that is my solution. if you are mechanically inclined: ...

...timing belt. Started the engine before putting all the parts back on (other belts, fan, etc) to make sure it worked. It did. Continued to replace all the other parts, now it will not start. It turns ...

...replace the Timing Belt? Any time you replace a Water Pump you have to replace the timing belt because it stretches out. If you did not then most likely your Engine is out of time and there for will ...

...timing belt and it wont start car jumped time and the timing belt broke. I replaced the timing belt and then i installed new battery and car wont start recheck your timing marks and try again ...

timing belt tension pulley bearings had come apart causing the timing belt to run loose. I suspected that the timing belt had jumped timing so I replaced the timing belt tension pulley and installed a