1996 Acura TL Series "remove timing belt pulley" Questions

...remove the pulley? You mean the serpentine belt, The timing belt is under the timing covers and is a bigger job. You would be asking different questions if you were in there. The tensioner, there are ...

...is behind the timing cover. You would have to remove drive belts and timing cover, then remove timing belt and check for wobble/looseness. If no wobble and no leak when engine is running, pump is

...remove the belt from the pulley, remove the lower mounting bolt, adjusting lock bolt and adjusting rod (zoom image link HERE )Hope this helps; also keep in mind that your feedback is important and ...

...remove the tension. I use a socket and ratchet. I count the number of 1/4 turns it takes. Or, have your mechanic do it. Also, I have had the harmonic balancer/pulley assembly go bad on my 2.5 TL. ...

...Remove timing belt guide from timing belt pulley. Loosen tensioner lock bolt. Pry tensioner away from timing belt and tighten lock bolt to relieve tension on the timing belt. NOTE: Mark the direction ...

...Remove timing belt. Mark the direction of timing belt rotation (on the timing belt) for proper reinstallation. INSTALLATION 1. Install tensioner pulley. Replace tensioner spring whenever timing belt ...

Remove timing belt covers as outlined previously. Remove timing belt tensioner pulley attaching bolt, then the tensioner pulley, spring and spring cover If reusing old belt, mark direction of rotation

...Remove the timing belt cover 6. Remove the timing belt tensioner pulley. 7. Remove the Timing Belt. 8. (If Replacing) Remove Idler Pulley. Installation is reverse of removal. Keep a close eye on the ...

...Remove timing belt. CAUTION: 1. Do not bend or twist the belt, otherwise its core could be damaged. The belt should not be bent at a radius less than 30 mm. 2. Do not allow oil or other chemical ...

...Remove the timing belt guide plate. Remove the upper and lower timing belt covers. Position the crankshaft so that the timing mark is aligned with the timing mark on the engine. Verify that the I and ...