1994 Acura Vigor "change lower left side ball" Questions

Ad

Question about Acura Vigor

1 Answer

...LEFT SIDE ITS A MANUEL TRANSMISSION When you changed the joint, I'm assuming you had the shaft out. A common problem occurs when you put the shaft back in, it doesn't fully seat in the transaxle and ...

Ad

change a bottom Ball joint Depressurize the hydraulic system. Jack the front and put on jack stands (both left and right side). Remove wheels. Slacken and unscrew the ball joint nut partially. Release

Ad

Question about Acura Vigor

1 Answer

left side but still a horrible creek coming out... not just a little squeek!!! i dont know what to do already spent 497 in labor and parts dont know what to do! help me please need to see if its upper

...Lower control arm bushings, bent frame, and a bad wheel bearing. Every one of these should have been caught by the alignment shop. If you replace the parts your self. Change them all. You already ...

...lower and upper ball joints the tie rod outer and inner. Is it recommended I change parts on both sides or does it matter, the right side seems to be good. I also changed the front disk,shoes and ...

left too,i have changed the ball joints lower arm links off side driveshaft,just seems weird when i press the clutch when turning the knocking stops,release the clutch it starts again sounds very like

...left and also when i let off the brake after applying the brakes. i have changed on both sides of the car--- struts springs, lower control arm all bushings lower ball joints, wheel bearings hub kind ...

...left torsion bars. The torsion bars replace the conventional coil springs. The lower control arm attaches to the front end of the torsion bar. The rear end of the torsion bar mounts on an adjustable ...

Question about Acura Vigor

1 Answer

...change the driveshaft seal on the left side of 1985 chrysler lebaron 2.2 turbo car? Have to remove wheel, have someone push brakes on & undo nut to shaft in center of hub, undo lower ball joint on ...

...change out the lower ball joints in a 97 mercury mountaineer I was told by the machanic that my lower ball joint on the left front side needs to be replaced. My truck is making a buking noise like ...

Not finding what you are looking for?
1994 Acura Vigor Logo

98 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Acura Vigor
1992 Acura Vigor

135 Questions

1993 Acura Vigor
1993 Acura Vigor

67 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...