1994 Acura Legend "high beam top bottom" Questions

...high beam bulbs to my 94 legend gs I have purchased new sylvania silverstar ultras 9005/9006 for my car. I have no idea how to install without touching bulb or screwing it up. They were expensive and ...

...beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well Park your car on a level ground ...

...beam bulb? Both sides have a rubber cover behind the actually headlight. There are 2 rubber covers, one on the top for the high beams and one on the bottom for the low beams. Drivers side is easy, ...

High Beams (15A) Deck Lid Release (15A) Mirrors/Antenna (5A) Head Lamp Illumenation (5A) Light Out Module (5A) EEC Ignition Coil (20A) Brake Lamps/ A/C (15A) Instrument Illumenation (5A) Column 3 (Top

...high beam works. What could be wrong. https://s1.postimg.org/1i7q5btlu7/headlamps.jpg Click on the link. The top wires to headlamp are voltage for hi or lo beam. The bottom black wire is ground. You ...

hi/lo beam not on at the same time replace the high/low beam switch on the bottom of the steering column, there is a rod going to it from the lever up top.

...high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with ...

...the assembly and you can move it out a small amount. Access to the bulbs is behind two rubber caps, the top one is for low beam and bottom one for high beam. Bulbs unlock with a quarter turn

...High beam works ok. Low beam bulb changed but still not working. Checked fuses in engine compartment but couldn't see any blown. I would check them electrically, not by looking, that way you can see ...

high beam is H-3. To re-install, press bar into Nylon clip and then install 3 10mm bolts. Use a Torx bit to engage gear teeth and adjust height if necessary. There may or may-not be adjusters for left