1992 Acura Legend "volts fog light wiring" Questions

...fog lights, or some people 'hot wire' the A/C compressor if they have problems. If it is a really small switch it may have to do with the security system. But beings it was put there after market/ ...

...fog lights Trace the 12 volts to the relay, test the relay to be certain it is working properly, make sure that 12 volts is delivered to the proper side of the relay and that you have 12 v from the ...

...fog light out); passenger side light working; and internal switch with fog light on (shows green illumination). 2) Get new bulp for light out - put in. Still does not work 3) Open up fog light ...

...volts solder , piggy back, or double plug in a connection into that wire and run one wire to the left fog light and one to the right fog light connect each fog light to an individual ground wire and ...

...fog light wont work. i replaced the bulbs and checked the fuses what can the problem be. look for fog light relay. ether yes the fog light relay or the wiring , or even the switch itself Check the ...

My front Fog lights stoped working on my Tucson 2011, Fuses ok, lights ok, suspect the relay but I can't locate it in the engine fuse box compartment??? not identified... no relay in engine fuse box, ...

...light bulb to each of the fog lamp connectors with the fog lamp sw turned on and the ignition key in the 'run' position. If the test light illuminates at both fog lamp connectors, then the problem is ...

...volts to the bulb or if the ground is missing (open/high resistance). With the fog lamps powered on, connect the black meter lead to a good solid ground on the body of the car. Touch the red meter ...

...fog light has no volts reaching the lamp B 7 model Hi check the fuse first. if ok then possible break the the wiring. You can either trace the wire back to fuse box or get an auto-electrician have a ...

...replace the head lights with a basic pair of fog lights The easiest way is to use a 12 volt test light. Turn the lights on unplug them, ground the test light clamp and probe the connectors. Good ...