Question about Hyundai Cars & Trucks
...bolt: 11 ft. lbs. 11- Step 1: 72 ft. lbs. 12- Bolts: 17-24 (M8) 16 ft. lbs. 13- Step 1: 33 ft. lbs. 14- Intake manifold collector: 15- Intake manifold: TORQUE SPECIFICATIONS all readings in ft. lbs. ...
...head bolt torque specs I have 1994 Oldsmobile Cutlass Supreme with 3.4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel ...
...bolt 1/4 turn in order 5. Tighten all bolts an additional 1/4 turn in order. ARP Head Studs 1. Tighten all bolts to 40 ft-lbs 2. Tighten in steps of 10 ft-lbs increments until the specified torque ...
head torque specifications 1.6 liter engine Torquing the head bolts is done in 4 steps. step 1 14 ft/lbs step 2 36 ft/lbs step 3 49 ft/lbs step 4 retourque bolts 1 and 2 at 49ft/lbs. Use this diagram ...
...head bolt,main bearing and connecting rod bearing for a 1997 Ford F 150 4.2 liter? Thank you... Cylinder heat bolt torque: Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: ...
head torque sequence: 7 6 2 4 9 .......................................... 10 3 1 5 8
Is's done in 3 stages 1st stage 45 Nm......
2nd stage 90 degree turn, or a 1/4 turn......
3rd stage 90
...bolt torque down for a 1996 dodge stratus 2.4 liter dohc Cylinder head bolts for 2.4 doch in ft\lbs Step 1 .....................................................................................25 Step ...
Question about Jaguar Cars & Trucks
......
...Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. I hope this ...
...Torque To Yield" head bolts(TTY) (that means the bolts permanently stretch during the initial installation.) You MUST use NEW head bolts when replacing or reinstalling the cylinder head in order to ...
326 questions posted
Usually answered in minutes!
192 Questions
163 Questions
139 Questions
78 Questions
84 Questions