...cylinder head, The timing belt needs to be removed. after the head has been removed the bottom surface(the end that contact the engine block) will need to be checked for warpage with a straight edge ...
Question about Acura Integra
head gasket on my 2001 sunfire HINT: The "torque pattern" on ALL cylinder heads is start in the center and work your way toward the ends. The specifications below are "torque-to yield" or
...way you will have the torque specs etc handy when putting it back together. Always have the cylinder head checked for warpage and cracks before re-using it Any good machine shop can do that for
...head bolts when reinstalling the cylinder heads as they are a one-time use, torque to yield type of bolt and should not be reused as they won't provide accurate enough clamping pressure if reused. ...
head gasket, water in the oil, Compression is...150,100,150,150 and #3 cylinder had a bit of water in it when spark plug was removed. Question is... What should I expect to find once I disassemble the
...cylinder head Water crossover Exhaust manifold Cylinder head bolts by reversing the torque sequence Cylinder head and discard the gasket WARNING With the camshafts remaining in the cylinder head some ...
Question about Acura Integra
cylinder head issue. If your doing this yourself, perhaps remove the exhaust manifold and take it to a shop to be checked for warpage or cracks, and simply repace it (along with a new gasket of course
...head gasket). one more way to check check cylinder pressure or wet spark plugs wet with water or antifreeze.if driveway is wet near center of engine check heater hoses if not them check freeze plugs ...
...cylinder head(s) from the engine so the valves, guides and seats can be refurbished to restore compression and oil control. A valve job may be necessary by the time an engine has 80,000 or more miles ...
194 questions posted
Usually answered in minutes!
235 Questions
192 Questions
163 Questions
78 Questions
84 Questions