1995 Acura Integra Coupe "child safety locks stuck locked" Questions

Ad

...a transmission problem? The switch should lock the shifter in park . And you should need a key to release it. It is a child safe safety that has been installed since the 70's on all US sold

Ad

...child safety lock stuck.Evidently, spring is missing. Where does the spring go and what sort of spring. Child Safety lock was attached to the door handle by a horizontal wire rod . The wire rod had ...

Ad

Question about Acura Integra

2 Answers

...child safety locks seem to be stuck on the rear passenger doors. I cannot open them from the inside or the outside (there isn't a key hole on the rear doors. So can't try that).When I push the ...

...child safety lock. on the drivers door. if it is not working, then you may have to take the door pannel off and either plug the wiring back in(especially if the door got slammed hard) or go to a ...

...this a fault with electrics or the door itself? Thank you. Sarah If it won't open from inside or outside. The power lock actuator is stuck in the lock position. The child safety lock is also ...

Question about Acura Integra

1 Answer

child door lock stuck will not disengage safety lock on rear door. Cannot open door from inside. Door works from outside and all normal keyless operations work fine If the little lever on the door ...

...this has been a on and off problem for a while. Won't open with the outside or inside handles? Like the lock is stuck or like the handles are broke? Do you know if the vehicle has child safety

child lock safety stuck child lock on should still let you open and close from the out side . Make sure the door is unlocked and check to make sure the latch did not relatch it sef before shutting the

...child safety locks: green in 12 pin connector in drives kick panel hope this helps you out. good luck Garcia, are you from guadalajara wanting to buy a celphone through MercadoLibre? if so, add me on ...

child safety lock is stuck in the locked position. how do I get it unlocked? spray some w40 in the gap or so DP spray. let it soak in for about 10min then try again.may need a bit of a help so you may

Not finding what you are looking for?
Cars & Trucks Logo

204 questions posted

Ask a Question

Usually answered in minutes!

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...