1992 Subaru Legacy "truck reverse 1st 2nd nothing" Questions

Question about Subaru Legacy

I just replaced the 1-2 , 2-3, shift solenoids on my 2003 trailblazer. Prior to changing these solenoids I had 1st and 2nd gear and reverse, but now I have nothing, won't go into gear at all,is th

...reverse no 1st 2nd, 3rd, drive, or reverse. Its like there is no signal going to the tranny. any suggestion other than replacing the entire transmission? no gears indicates that the torque converter ...

Question about GMC Cars & Trucks

1 Answer

I have a 94 gmc suburban with a 4l60e and have nothing but 1st and reverse gears it will let go of 1st but nothing where 2nd should be.

I have a 94 gmc suburban with a 4l60e and have nothing but 1st and reverse gears it will let go of 1st but nothing where 2nd should be. You need a transmission rebuild my friend.

Question about Subaru Legacy

1 Answer

No reverse sometimes geo metro a/t

...reverse doesnt work trans shift problem 1st to 2nd upshift no manual downshift to secound let off accelerator when starting from drive will let trans shift from first to third can shift from drive to ...

Question about Cars & Trucks

1 Answer

...reverse but drive 1st and 2nd an 3rd won't go any where tranny fluid a little low but not bad need help anyone know Here is a forum from Chevrolet talking about the trany problem. ...

Question about Subaru Legacy

1 Answer

Have a 2001 chevy 2500 hd 4x4 truck that shifts into reverse but wont move.. I shift from park to neutral then drive to 3 to 2 to 1 and all seems good but it wont move in reverse,,, any info on this

...truck that shifts into reverse but wont move.. I shift from park to neutral then drive to 3 to 2 to 1 and all seems good but it wont move in reverse,,, any info on this drives in forward and in 1st . ...

Question about Cars & Trucks

1 Answer

I have a 98 chevy silverado. My transmission only has 2nd,3rd and reverse if you manually put it into 1st it still has 2nd gear in 1st&2nd gear and 3rd gear works in 3rd and drive only. Nothing higher

...reverse if you manually put it into 1st it still has 2nd gear in 1st&2nd gear and 3rd gear works in 3rd and drive only. Nothing higher Remove trans pan and inspect shift solenoids. These are prone to ...

Question about Subaru Legacy

1 Answer

Mannual box problem

...reverse, now i have nothing, the shifter just flops around when trying to put it in to these gears, all the others, 1st, 2nd, 3rd and 4th are fine, can you please help me? Cheers, Nathan change the ...

Question about Subaru Legacy

1 Answer

2002 PT Crusier Touring Edition just over 100K miles, NO reverse no first gear, Only 2nd gear???

...reverse, finally got it pushed back enough to go forward and fond that there is no 1st gear, only 2nd, no 3rd, no overdrive, limped it home. What could be the problem? No reverse and only second,You ...

Question about Cars & Trucks

1 Answer

When I place a car in first gear to move forward the car won't move anywhere or in reverse all I hear is light grinding nothing hard nothing heavy or too loud. Audi a4 1999

...snaps. You lose 1st, 2nd and reverse. Take it to a good mechanic for this job. The actual repair is simple. The difficulty is that you have to remove and strip the entire gearbox to replace the

Question about Cars & Trucks

1 Answer

My 2001 Ford Ranger grinds in drive and 1st, and 2nd but nothing else and wont drive but will in reverse, what could cause this?

...1st, and 2nd but nothing else and wont drive but will in reverse, what could cause this? I'm guessing you have a automatic trans? if it is a 4x4 make sure you are in 2wd or 4x4 all the way if so you ...