1992 Subaru Legacy "replace timing belt" Questions

...replace the timing belt on my 99 subaru outback legacy? timing belts do no use a hydraulic tensioner, that is only used on engines with internal oil lubricated timing chains. Timing belt replacement ...

timing belt replacement engine cranks, but won't restart after timing belt/wtr.pump replacement-did all because of geared idler pulley bearing failure on 1990 ej22 h4 engine with 186k miles r u sure u

...replace the timing belt or chain because it is internal and a 8 hr job. According to my book I don't even have a timing belt or chain. At least its not listed as needing schelduled maintenance I also ...

...replace timing belt, and not water pump, water pump could go out and mess up the timing belt, now it has to be done all over again, timing belt, water pump and labor. You do not have to change the ...

...engine. that means a broken timing belt also means bent valves. you are going to have to pull the heads and get new valves and do the head gaskets while you are at it. then replace the timing

replace timeing belt How long does it take to replace the timeing belt on 97 legacy? If you have the 1.8 SOHC engine, book time is 2.7 hours, If you have the 2.5 DOHC engine, book time is 3.2 hours. ...

...on how to replace the timing belt oh a ej25 dohc. http://endwrench.com/pdf/engine/FtTimingBeltReplaceF00.pdf If you need any help along the way let me know I have done this timing belt a few

...timing belt on my 2.2 ltr. engine, does the serpentine (accessory) belt have to be on before it will fire? NO YOU CAN CRANK IT UP TO SEE IF IT WILL FIRE UP BUT DONT RUN LONG no it doesnt, but dont ...

...timing light and it's where it needs to be (15 BTDC) but light skips a beat from time to time and exhaust is not purring steadily but also skipping a beat as if it's on;y running on 3 cylinders (I ...

...timing belt? yes, there is a big belt and it is a job to replace, remove just about everything up front, radiator, timing covers, fan, belts, pulleys, hoses, etc, I think you change the water pump at ...