2001 Mercury Cougar "olds crank" Questions

Everything has power, but engine will not crank or even click when attempted to start. my 1989 mercury cougar started fine a few days ago, i had to replace the battery due to power loss, when i did, i

broke key in ignition lock body, replaced and now car won't crank 2001 mercury cougar replaced ignition switch, lock body, and transponder and car won't crank. I hope you kept your old key, it will ...

99 cougar won't start Slight clicking noise when starting (not like battery dead clicking). Lights full power. Did this 3 months ago and started fine in 3 hours. Suspsecting something with the factory

1990 cougar ls will crank but will not start HAVE REPLACED THE COIL, DISTRRBUTOR, MODULE,BRAIN,WIRES AND PLUGS IT IS GETTING GAS You haven't listed if it is getting spark. Have you pulled a plug wire ...

MY 1999 COUGAR JERKS WHEN I'M DRIVING IT, WHY IS IT DOING THAT? The wire harness for the crank senser can get into troble and make a crasy cut out miss stumble, You may have to remove the senser and ...

1999 cougar been setting for a couple of months tried to jump it and all i get is a continuous clicking sound when i turn the key is this just the battery needing to be charged or something else? if ...

How do I install the timing belt on my 89 mercury cougar? 1 Take the old belt off the sprockets once you have disconnected the battery cables and removed the drive belt. 2 Inspect the timing belt ...

...olds aurora won't crank. battery volts reads 12.5. when i try to crank it, meter reads 5.8. altinater good. starter good. what do i do? 1997 olds aurora won't crank. volts read 12.5. when I try to ...

my engine stalls? how do you replace a crank shaft sensor on a 2001 buick lesabre?? The crank sensor is located behind the crank pulley on the 3.8 liter. The crank pulley must first be removed. A ...

2002 Chrysler town and country won't start. It cranks but will not start up? Replaced fuel pump (old one was good) and spark plugs. Still will not start With a scan tool, check crank position sensor. ...