Question about Mercury Grand Marquis
...IMPACT GUN The quick and easy method which is done in all the shops is to use an air powered impact gun. Sometimes the electric impact guns will work.The bolt that holds the balancer on has probably ...
How do you get that dam bolt out of the crank? I use an impact gun, this is the only way I know. When I tried turning by had the engine revolves, the impact gun worked wonders.
...impact gun with socket+extension on pully bolt these impact guns are 12 volt and are usually used on wheel nuts power supply from either battery or cig lighter socket the gun actually spins fast then ...
Question about Toyota Cars & Trucks
...impact gun, when using heat , my pryro gun tells me that ive hit 300F and i stop.there. (for good reasons, babbit bearings) one guy here, just hit it with 3/4' impact and wrecked the treads there and ...
Question about Mercury Grand Marquis
...impact gun) or heat axle to about 200F. to 300f the as it cools hit it with penetration oil. as it cools it may suck in the oil (physics trick) and now the impact gun. no shop air, makes hard work on ...
...You need an air compressor & air impact gun & impact sockets, to work on exhaust If your replacing everything after the converter, just cut it off There you need an air cut off tool or hack ...
...impact gun may not be strong enough. Ive taken many off in the past and They are extremely tight. Juat keep working at it and i would recommend soaking it in WD-40 or some other kind of penetrating ...
Question about Mercury Grand Marquis
How do you remove/ replace trunk lid on a 2013 Genesis sedan ? I want to spray paint and get all prep work done, how do I remove it . the hinges on all cars , unscrew. (impact guns work only)
...any way to stop it from moving? 1/2" Air Impact Gun or hit a wrench You must use air powered impact wrench. stopping and starting several times with impact has always worked for me for almost 40 ...
...impact air gun to loosen the lug nuts. I would think for $5 they would be happy to do it. Installation with an impact air gun is probably why it's stuck, as a lot of people tend to over tighten lugs ...
795 questions posted
Usually answered in minutes!
661 Questions
611 Questions
534 Questions
496 Questions
384 Questions
