heater control head How do I get the heater control head out First is required removal of dash, and heater core control box can be dismounted
Question about Mercury Grand Marquis
...heater control head if electric temp control. .key on, press off and floor buttons at the same time for 2seconds then release and press auto button for a second, ck what codes show on heater control ...
Question about Mercury Grand Marquis
2001 mercury marquis no fan for heater. climate controlsystem on dash appears to be working fine. Ok you have a bad blower speed controller if you have power to the motor. It is located under the hood
Question about Mercury Grand Marquis
...control unit you need to find the lines that feed hot water to the heater and check to see if line coming in to the heater is hot and the line returning from the heater is warm to hot. sometime the ...
Question about Mercury Grand Marquis
heater control valve on the car? Insufficient, erratic, or no heat Low engine coolant level. Engine overheating. Plugged or partially plugged heater core (18476). Temperature blend door binding/stuck.
...heater control valve, under the hood tapped into the feed hose for the heater core, and while you switch from hot to cold they should see movement, if not it has to be checked for vacuum feed and or ...
Question about Mercury Grand Marquis
...control switch for the heater/ariconditioner fan on the 2001 mercury Grand Marquis If the fan will not run on ANY speed in your Grand Marquis, the problem is most likely NOT the control switch.Check ...
Question about Mercury Grand Marquis
...heater control valve on the eatc unit in my 2003 grand marquis / This vehicle does NOT use a heater control valve. Coolant flows to the heater core at all times. Temperature is regulated by the blend ...
...heater control valve to open at the same time. sending hot coolant thru the heater core for heat. this problem was so common that you may have to buy a new control head as the ones in salvage yards ...
...heater control valve is not properly operating or your heater core is clogged. Locate the heater control valve under the hood, should be close to firewall on heater hose, have someone adjust ...
795 questions posted
Usually answered in minutes!
661 Questions
611 Questions
534 Questions
496 Questions
384 Questions