...remove the lower control arm front bushing bolt I am trying to remove the lower control arm on a 94 mercury capri and the front bushing bolt just turns and turns and doesn't back out try to releive ...
...person with tools. The rotors have the front bearings pressed in, so the rotor must be removed from the axle. Bearings must be pressed in, and preload must be adjusted for the new ...
...four bolts, first remove the bulbs and tie the wiring back so not in the way ,ther are two bolt on top of headlight through the front top panel and two bolts 1 either side of light ,lift away ...
...remove the Rotor. Then you should have the Rotor checked for wear. You will need to press or drill out the old lug. There will be a labor charge and cost of the replacement lug. If the Rotor is ...
...front side. They had to remove the light assembly. When they re-installed it they did some thing wrong. When you raise the headlights, it won't raise all the way. You have to use the fine tune ...
Question about Mercury Capri
...front covers on the engine. Remove the covers, you should see the timing chain, crankshaft pulley and camshaft pulley. Turn the crankshaft be hand until the indicator mark on the crankshaft lines up ...
...remove the soft top handle from the Mercury Capri? I'm sure you have figured this out by now, 6 months later, but here goes...3 screws hold the handle in, 2 you can see, phillips, and one hidden ...
...front wheel drive while an older one may be rear wheel drive. One of the biggest problem is having clearance to remove the oil pan. Sometimes in the closest clearances turning the crankshaft can help ...
...the headlight from a 1991 mercury capri take four screws out of housing (two on each side) slide housing toward front of car. remove two screws from crome ring and remove light. reverse to ...
278 questions posted
Usually answered in minutes!
71 Questions
63 Questions
31 Questions
10 Questions
3 Questions