1991 Mercury Capri "fuel power" Questions

...power to fuel pump Battery was installed backwards. The car was not started like this. Battery was changed as soon as it was realized, under a minute. Found that an 80 amp fuse had been blown, ...

...power to the fuel pump. It has a reset button on it. Usually this switch is behind the front kick panels or in the trunk. There should be a test port on the fuel rail and pressure gauges can be ...

...im getting power to injectors. Where is the fuse to fuel injectors? dont have manual Manual is at techcapri.com.  Too many variables here to diagnose in less than a small book...good ...

...work to get more than a limited power increase. For example, you can shove as much fuel and air into the engine as you like, but if the exhaust doesn't allow the lot to get out, you achieve

...power to fuel pump Has the ignition starter switch been replaced yet? They are a known case of this. You can access the switch by dropping down the steering column inside the car (two bolts) and then ...

...fuel filter. I have an actron OSDll scanner, but I am not completely sure where the computer hook up is and at that I'm sure that I need an adaptor to use my scanner. I think it may be the ...

it gets hot then turns off. itsa feature to save fuel, if it stayed on all the time it would use abut 3 horse power causeing lower fuel milage, as long as the temp gauge is normal don't worry about it

no power to fuel injectors Is the check engine light on ?  Have you checked for trouble codes ?It could be a relay, a fuse, the ignition module,  or a list of other things

...power and fuel just no pulse to injector what do you do to repair You may need a shop manual. The injector pulse comes from the engine computer, and the computer gets signals from several

power to fuel pump. Does not seem to be a problem with inertia switch. try cleaning off battery terminals and connecting leads with small wire brush. red is positive, black is negative. also make sure