1990 Mercury Topaz "remove pick coil distributor" Questions

Ad

remove the distributor cap and look at the connector to the ignition module from the pick-up coil/stator and it should be white like it is shown in the image here of the pick-up coil/stator, and if it

Ad

...& rotor & the coil pack & the ignition control module now trying to replace the pick up in the distributor but can not get the center shaft loose Drive out cam gear pin & remove ...

Ad

remove the ignition rotor, and then simply un-plug the wire connector to the the pick-up coil/stator and then lift it straight up and away from the distributor, and when re-installing the pick-up coil

...pick-up coil/stator is easily replaced in a dodge distributor, and once you have removed the distributor cap and the ignition rotor, then just dis-connect the wire connector from the pick-up ...

Question about Mercury Topaz

2 Answers

...remove the pick up coil from my 1991 caprice distributor in a 305 engine Hi, In order to remove the pick up coil, the distributor must be removed, once out, take the roll pin out of the gear, and the ...

...pick-up coil, you need to remove distributor (mark where rotor is pointing first) Then you need to remove pin in cam gear on end of shaft to remove gear so you can remove shaft from housing. Then you ...

...remove the pick-up screws If you have 850 OHMS & wiggle the pick-up wires & no issues,that may not be your problem A no start-- could be the distributor ignition module, next to the pick-up ...

...remove the pick-up coil from the distributor. 1989 GMC 1500 4X4 The distributor does have to be removed and dis-assembled in order to replace the ignition pick-up coil/stator, and if the pick-up ...

...pick up coil changed out The pick up coil is in the distributor cap. Mark and remove the plug wires, remove the cap, remove the pick up coil. Fining order for 5.0/5.7 is 18436572. Counter

Question about Mercury Topaz

1 Answer

...remove the pick-up coil in a 1974 dodge truck? look for the distributor,remove the 2 screws holding the black cap on, carefully pick the cap up and out of your way,don't remove plugwires from cap,as ...

Not finding what you are looking for?
1990 Mercury Topaz Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...