1999 Jeep Grand Cherokee "replace ball joints" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...ball joints I was told that my '98 jeep grand cherokees ball joints need to be replaced. What parts would I need for this? The only parts you need are the ball joints, upper and lower, a total of 4, ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...replace cv joint how hard is this i have not done this before also any special tools needed. I do most of my own minor repairs. any help will be great. Not to bad you will need a ball joint spreader. ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...the shocks or springs out to replace ball joints. just the wheel assembly comes off. and yes i believe there are alighnment adjustments for the rear. but i wouldn't do that at home myself. take it

Question about Jeep Grand Cherokee

1 Answer

...ball joints? To replace those, you need a special press fixture and a good dose of experience. They are pretty much the same as Chevrolet press in joints but much more difficult to get in and out. I ...

...panhard rod, the one from the chassis to the axle, the bushes if worn can give you that fault. Also how are the hub ball joints, if you have worn ball joints, that can do it as well. Hope this ...

Question about Jeep Grand Cherokee

1 Answer

replace the boots on the front c/v joints on my 1998 Jeep Cherokee. Do I have to split the ball joints or is there a faster way Ball joints can stay in place. I generally disconnect the tie rod end to

Question about Jeep Grand Cherokee

1 Answer

...replace them if needed). Press hub off pinion. I use a large steering wheel puller/harmonic balancer puller. Axle now will slide out of the hole where the hub was. Consider replacing the ball joints ...

replace ball joints 03' Jeep Grand Cherokee Overland read the fsm ? its all there , in the WJ book, just read it. (from jeep to you, verbatim) http://www.jeep4x4center.com/knowledge-base/index.htm?utm

...replace rotor,caliper,wheel bearings and ball joint and any other loose or worn susp/steering gear.if you just replce rotor , going to happen again but worse damage.poss breaking pwr brake booster ...

Question about Jeep Grand Cherokee

1 Answer

...This is usually a ball joint. Jack that side up, and just as the wheel starts to clear the pavement, does the bottom slide out a touch? If so, replace you ball joints, and the problem will go

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

3,837 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...