1999 Jeep Grand Cherokee "oil pressure sending unit work" Questions

...oil pressure when accelerating, fine at idle. My 2002 grand cherokee was leaking oil through the plug of the oil pressure sending unit. I replaced the sending unit and corrected the leak but the oil ...

oil pressure reads High all the time My jeep runs great but the oil pressure gauge reads high all the time, none of the sensors online match my vehicle. oil pressure sending unit is not working right.

...oil pressure gauge drop Idles at 40 lbs pressure give it some rpm and it goes to 0 lbs. Pulled pan, screen is clean.Hooked up another gauge to block. Engine has good oil pressure. Sending unit was ...

oil pressure drops from 40 at idle to 0 when given rpms. Will come right back to 40 when you let idle again. I have removed pan and checked screen. It was clean. Original sending unit was leaking so I

oil pressure guage not registering I have a 2004 Jeep Grand Cherokee w/a 4.7 HO engine. The oil pressure gayge dropped to zero. Changed the sending unit. Still zero. Hooked up a manual gauge and it ...

...oil pressure Is there a possible link between the fan relay switch and the oil pressure sending unit and/or pressure switch? I've been replacing one after the other. If the fan relay switch is ...

why dose my oil pressure not work? Maybe your oil pressure sending unit is bad. It's usually located next to the oil filter. Have it checked.

oil pressure gauge does not regis and i just had an oli change. The light now comes on and says check gauges. I did drive the vehicle for 300 miles with the oil gauge at 0. What should i do to get the

OIL PRESSURE RELIEF VALVE it was a couple of days ago when the oil pressure went to 0 psi and then went to the normal position,and it stayed like that for too days,at the present time everything is ...

...oil pressure needle keeps marking 0. It had the same problem once but I changed the oil and kept working fine; then about 2 months after that oil change the oil pressure needle started to drop again, ...