1999 Jeep Grand Cherokee "holds light bulb place headlight" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...bulb. There is a long bolt (use 1/4" socket) that holds the headlight assembly in place located on top of the headlight. Remove this bolt, then use a screwdriver to pry lightly on the upper right ...

Ad

...bulb in your hand. Using a flat screwdriver gently pry the tabs up where the plug from the wire clasps over the socket. Don't pry too hard or you will break the tabs. Once out simply plug in your ...

Ad

Question about Jeep Grand Cherokee

1 Answer

light bulb on the back of it and pull it out of the headlamp assembly. Unplug the bad one and replace it with your new bulb. Plug the new bulb in, insert it into the headlamp assembly, turn it to lock

Question about Jeep Grand Cherokee

1 Answer

...light bulb and socket from assembly (this will be the top bulb) put it to the side 3. Inside this hole on the rim you will see three silver metal contacts, two side by side and one by itself. 4. With ...

...place by 3 snap connectors. (indicated by the red arrows in the bottom left photo in the image above) Use your hands. Do not use a screwdriver or something that may damage the fender of the headlight ...

Question about Jeep Grand Cherokee

1 Answer

...bulb contacts. With my 2000 Grand Cherokee, the brake lights would work when the headlight/tail lights were off. If the lights were on, the rear lights would go out altogether when I pressed the ...

...light bulb and socket from assembly (this will be the top bulb) put it to the side 3. Inside this hole on the rim you will see three silver metal contacts, two side by side and one by itself. 4. With ...

...light bulb and socket from assembly (this will be the top bulb) put it to the side 3. Inside this hole on the rim you will see three silver metal contacts, two side by side and one by itself. 4. With ...

...bulb. to change the head light there are three 10MM headed nuts behind the light sticking though the raditor support remove them an the light can be pulled out the front. Some were made with sealed ...

Question about Jeep Grand Cherokee

1 Answer

...light lens to pop the clip loose that holds the lens in place. The headlight assembly can then be removed, once the wire harness is unplugged from the bulb. There is a round retainer that locks the ...

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

3,837 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...