1999 Jeep Grand Cherokee "change spider gears" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...spider gears or a positraction unit. Those are known as the center section. you also have a pair of axles. Of course those parts all have bearings too.(except for posi and spiders). The housing is ...

Ad

changing rear axle bearings on a 94 cherokee hard Only thing is that the axles are held in by "c" clips and you need to remove the spider gear shaft to get them out. (inside the differential)

Ad

Question about Jeep Grand Cherokee

4 Answers

...spider gears, working on differential problems is an exacting procedure that requires careful measurements etc that even many decent techs cannot do properly. Carrier bearings and gear failures will ...

Question about Jeep Grand Cherokee

2 Answers

...Change the seal while your in there. Hope this helps. Best to get a manual to guide you through, but basic procedure is to remove brake assembly and diff cover, remove "c" clip at axle end after ...

Question about Jeep Grand Cherokee

2 Answers

...spider gears inside the differential. Don't worry, if you don't get them lined up, the axles won't slide all the way in. Once everything is back together, replace the differential cover and refill ...

Question about Jeep Grand Cherokee

1 Answer

...change worn spider gears the rear spider gears are worn and when shifting from forward to reverse (on the column), I feel the gears jump. How can I change and which model gears do I need new spider ...

...change the insides of the rear dif my spider gears broke i have taken out all the bolts but it still wont come out the pin going thur the carrer there is a bolt in it 8mm or 5/16 take bolt out then ...

...change brearing remove differential cover,turn axle until chunk turns around to access the small 5/16pin bolt remove pin bolt ,slide spider gear axle rod out ,go to axle ur working on and push axle ...

...Spider gears are not difficult to replace...however, if they are worn, usually this contaminates the lube and can cause damage to carrier as well as pinion bearings...Those require precise settings ...

...change out the pinion gear? not a good idea to chg. just pinion, best to chg. both ring and pinion, and for that you will need a dial indiactor, so you can get the right back lash. but my advice to ...

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

3,837 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...