1997 Jeep Grand Cherokee "replace timing chain gears" Questions

replacing timing chain and gear jeep 4.0 want to make sure I am top dead center, them line up the marks on the gears, when replacing the timing chain? yes when at TDC the marks will line up easier.

timing mark on the pulley should be exactly between the two marks you made. If not, make a new mark at that point and use that as your actual TDC reference. If it is radically off, replace the pulley.

timing chain set up i changed the timing chain and now i need to know how to set the timing gears you know the key hole on a 1994 jeep grand cherokee 5.2l engine hi there if you already replaced the ...

...timing belt or chain? And does either need changing? That depends on which engine you have. Both 4.0 and V8 engines have a chain. The chain has no real time limit on how long it's good but from ...

...replace the timing chain. Timing Chain Function The timing chain connects the camshaft to the crankshaft via a gear system so that the top and bottom ends of the engine rotate together. If the timing ...

...replace timing change compression is 60.how do i time it. will this also cause lo compression.it is a 4.0 engine Thundergod is correct, whoever put the timing chain on did not have the cam and crank ...

...timing chain problems I replaced the timing chain on my 1995 Jeep Grand Cherokee at 188,000 miles, but there was s o much plan in the chain I had trouble getting the new one on - so I rotated the cam ...

...B-4 TEARING IT APART?MAYBE A FUSE OR RELAY OF SOME KIND...NOT SURE..THANX if it turning over faster than it should and not trying to start its the timimg..you need to replace the timing gears and ...

...timing chain may be going bad. How can I tell? How much to fix it? Depending upon which engine you have a chain replacement should be the better paqrt of $500. (mostly labor) Chains stretch but ...

...Timing chain Problem #1 Top Dead Center on Compression stroke, remove dist cap and see where Rotor is Pointing, it should be pointing at #1 Plug wire if not Timing chain & Gear Replacement time. If ...