1997 Jeep Grand Cherokee "remove power steering pump 97" Questions

Ad

...power steering pump mounting bolts using a ratchet and 13mm socket or a 13mm box wrench. Loosen the pump upper pivot bolt, lower locknut and the pump adjusting bolt using a ratchet and 13mm socket or ...

Ad

...power steering mounting bracket was cracked in a couple spots(this after I removed the pwer steering unit and the mounting bracket fell to the ground in pieces!) , didn't have to unhook any hoses, ...

Ad

remove the power steering fluid from the reservoir. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02. Remove the power steering pump pulley. For

Question about Jeep Grand Cherokee

1 Answer

...pump leak How do you remove the steering pump of a 1997 olds bravada? you need to get a special power steering pump pulley removal tool. you can rent it from orielly auto parts for about thirty ...

...power steering pulley. Usually a ratchet with a deep 13mm socket will do to remove the 2 bolts located at 12 and 6 o'clock then you will be able to move it out of the way so i,m i going to move to ...

Question about Jeep Grand Cherokee

1 Answer

...water pump 1 bolt left behind power steering pulley is there a trick of the trade or remove pump? you have to remove p/s pump need to put socket in hole on p/s pulley to get to bolts to remove ...

Question about Jeep Grand Cherokee

1 Answer

...remove the front to belts to replace the alternator belt. look carefully as power steering belt has to be removed and A/C if fitted,slacken bolts on power steering pump then find the tensioner bolt ...

Question about Jeep Grand Cherokee

1 Answer

...remove the belts. 2 reove the power steering hose.3. take bolts out the attatchiment to block bolt out. 4 take out the adustment bolt. remove the pump. install in the reverse order, By the way power ...

Question about Jeep Grand Cherokee

1 Answer

Remove the power steering pump from the vehicle. To Install: Position the pump to the vehicle and secure using the front retaining bolts to 22 ft. lbs. (30 Nm). Install the rear bracket bolt and nuts.

remove a power steering pump out of a 97 chevy suburban How do you remove a power steering pump out of a 1997 chevy suburban and reinstall it? give these websites a try www.alldatadiy.com and ...

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

3,380 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...