1997 Jeep Grand Cherokee "installing distributor" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

i need a digram of the placement of the distributor in a 1995 jeep grand cherokee 4WD L6 4.0 L Distributor location (placement) is on the passenger side of the engine, half way back in a hole provided

Ad

My 1997 Jeep Larado had the distributor brake at the braket that holds it in place. The jeep stopped running of course. I went and got a new distributor and brought the number 1 cylender to TDC and ...

Ad

Question about Jeep Grand Cherokee

1 Answer

No spark Installed new engine installed the pick up coil (where the distributor used to be) could I have the wrong timing or damaged the crank sensor on the bell housing? I'm a little lost ...

trying to ****** the ignition but the distributor doesnt move when loosened is there some kind of other adjustment? Your distributor is "locked". Timing is regulated by the computer using the crank ...

Question about Jeep Grand Cherokee

2 Answers

shuts down while driving for a sec. or two and the goes doesn't do it all the time what causes this its like it runs out of gas for a sec or two and then takes back off and is fine for a day or two ...

Question about Jeep Grand Cherokee

1 Answer

...distributor isn't adjustable, you can't turn it to compensate. The item you intended to replace is the crank sensor which is located on the drivers side of the bellhousing at about 11 ...

Question about Jeep Grand Cherokee

1 Answer

how do i set the timing on a 2002 jeep grand cherokee laredo 6 cyl? Your timing is locked. (distributor is installed with no adjustment feature... on 02's you may not even have a distributor as it

Question about Jeep Grand Cherokee

1 Answer

96 jeep Cherokee Distibutor installation instructions with pictures But must br step for step and very detailed. Remove all the spark plugs. On the front of the engine the bottom pulley (the harmonic ...

did not cover wires or distributor. Thanks Remove the distributor cap and dry it's underside thoroughly before re-installing it. Make sure you know which plug wire goes where before removing them

Question about Jeep Grand Cherokee

1 Answer

i need to install the sparkplugs wires Best way, is to lay out the new wires on a surface near the work area and arrange them by length. Then, remove one wire on your jeep at the plug, holders, and at

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

3,380 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...