1997 Jeep Grand Cherokee "flasher relay clicking" Questions

...Flasher/turn signal relay are malfunction,it suppose to have a regular clicking sound everytime you use the flasher/turn signal switch, you need to replace with a new one,but you need first to check ...

...relay "flasher" that's the name n autozone , but the noise still and is the flasher what make the noise, I'm wondering if they sale that relay flasher silence why not post a photo of the clicking ...

...flasher relay for turn signals,usullay by hazzard flashers.turn on hazzards use sound to locate,turn flasher will be near.some will interchange to get you by till you can replace. check the brake ...

...the postion F4 / 15 Amp ( Lt. Blue ) Flasher, hazard switch (see Junction Block diagram above for location of turn signal Flasher relay - Mopar p/n 4686094) Repair tip: WJ flasher repair. Hope

...2wd v6 interior fuse box clicking Any issues with hazards or blinker operation?  Could be flasher relay going bad.  It's generally attached to the button you push to activate

...flasher and hazard unit.It will need to be replaced.its small and cost is minimal.When you do replace the unit,disconnect the neg. cable from the battery.The unit relay may be blue in color.Hope this ...

...flasher relay with the prongs sticking out. There will be 2 plastic tabs holding it together. Break or bend these back. Pull out the insides. On one side will be all the components. On the other side ...

...clicking when I push the button. Turn signals and brakes are working fine. Any idea what this might be? Michele, most systems run on a 3 flasher bases 1 for left 1 for right and 1 for hazard, it ...

...relay located? yes it is linked with the hazard light in a way. when you turn the hazard light on do they seem like they work fine?? if they work good, i would say your need a turn signal flasher, of ...