...throttle body and carefully cleaning the valve itself, without turning the plunger. If that does not help, you will need to do electrical testing on that and other components to find out what's going ...
...throttle body which looks like a carburetor scaled down. --- Instructions on how to remove and replace the throttle body follow: Throttle Body REMOVAL & INSTALLATION Disconnect the negative ...
...throttle body. If you refer to the throttle body as a clock, and picture the egde closest to the front bumper is 6 o'clock then the IAC sensor would be located at 12 o'clock. I think in a 02 GC it ...
throttle body/idle control valve interior. Remove air ducting between air cleaner and throttle and then clean throttle interior and throttle plate of any oily grime build-up; use cloth and WD40 spray.
cleaning the throttle area behind the plate and is possible the back of the throttle plate itself. Pay special attention to the edges of the throttle plate. Mounted onot the the throttle body exterior
...throttle body is clean and closing fully. Also check all vacuum hoses for breaks and good connections and that the idle air control motor (next to the throttle position sensor on the throttle body is ...
...Throttle body cleaner. Just follow the instruction on the can and pay attention to the IAC, try to spray the Throttle body cleaner hose towards the IAC. DO NOT USE CARB CLEANER, it's too ...
...cleaning the valve and passages as well as the throttle body with carb cleaner. Check the operation of the valve by hooking up the connector and turning on the key (do not start the car) while it is ...
...or throttle body cleaner for this. it is also a good idea to clean around throttle plate to remove carbon on throttle body itself. but do iac first and put back on throttle body. have a good
3,380 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,639 Questions