1997 Jeep Grand Cherokee "change brake light switch 99" Questions

99 jeep grand cherokee brake lights do not work My brake lights do not work and I think I tried everything, changed switches etc, my only issue is with these lights and I am at a loss any suggestions ...

...brake light on and more "The parking brake switch is in circuit with the red warning lamp in the dash. The switch will cause the lamp to illuminate only when the parking brakes are applied. If the ...

...brake switch either the switch or fuse!!! Check the bulbs... Possibly the wrong bulbs and make sure they are not crossed! But switches are very common i have a 99 jeep and break lights work till i ...

change the brake pad switch . I was told that i to change the brake switch with a part for Toyota Dealership . Plz help me Hi my name is molley. i have a 1998 toyato corolla and it is smoking. it wasn

...brake switch...none of that worked...all the other lights work fine...can not figure out what to check next Change your turn signal switch in the steering column 99% sure that is your problem you can ...

...brake system. the turn signals are independant of the tail/stop lights on the rodeo. left blinker works fine. i have changed the flasher module, every single light bulb in the system front and rear. ...

...mounted to the brake pedal arm, was faulty. My guess is that you have a similar problem. Pretty easy to replace... couple of wires and a clip as I recall. Good luck. need to change brake light ...

...brake light fuse. If fuse ok, unplug brake light switch at brake pedal and cross the terminals with a jumper. If brake lights work, the brake switch is faulty. If still no brake light operation ...

...brake switch and work about 3 days Check under the drivers pedals for a plastic switch around the brake pedal. This operates the brake lights. It may be out of adjustment or broken. There should be a ...

...brake ligh switch on a 99 nissan Quest mini van I can a similar problem in a toyota 4runner, i did the same changed the bulbs and fuse, but turn out to be the brake switch. The switch on the 4rummer ...