1997 Jeep Grand Cherokee "97 pcm replace" Questions

...97 Jeep Grand Cherokee, and went through the same thing you have. With mine it had to do with 2 separate problems. 1. being the throttle positioning sensor. The other is a bit more to fix and has to ...

...97 grand cherokee tsi 5.2L and it was what seemed like slipping when cold and loss of power when i accel. when warm it shifts better but does not kick down until slowing down or stopping and still ...

...97 Jeep Grand Cherokee.. after trying several things including tuneup and cleaned the injectors, still have this problem ...I went online and found out this is a common problem,many say it is the PCM ...

97 Jeep Grand Cherokee that had the exact same problem, it all comes down to the PCM. The computer was bad and needed replacing, all the little tricks I read about helped for a day or two at the most,

...97 Jeep started dying on me. It usually started right up. I replaced the ignition coil, the crank sensor and also the PCM. I am out of ideas. Now it won't start at all. need to find whats missing, a ...

...PCM, the camshaft positioning sensor, the crankshaft positioning sensor and all the relays. Still it fuddles up. So where does the tachometer get its information from? Could this be a TCM problem? ...

...pcm to my 97 grand cherokee and the pcm started my 97 just fine. swapped out ignition switch and that didnt work. NO spark No fuel No volt gauge No fuel gauge scanner will not connect to obd hookup, ...

...97 shutting off while driving my car will start and then when im driving will shut off i just replaced my abs controller and when i turn it off start it back up it will drive and then randomly shut ...

...97 grand cherokee cranks but wont start i got fuel pressure and i sprayed starting fluid and changed the cps and still wont start looking for any and all solutions Did it act like it wanted to start ...

...PCM Knock Sensor Circuit A knock sensor tells the engine computer when one or more of your engine's cylinders are "knocking", that is, exploding the air/fuel mixture in a way that delivers less power ...