1994 Jeep Grand Cherokee "transfer case trying slip 4wd" Questions

...transfer case is under a heavy bind. Take it off of the road in some grass or dirt and then move it forward a few feet then simply hit reverse. Don't move much maybe an inch and it may release the ...

...in 4WD and trying that? I had a Jeep come in, same thing, wont move, ended up being a blown transfer case. Put it in 4 hi or low, and see if it will go into gear and move. Long shot, but worth a

...transfer case unit its self. these do wear out over time and not uncommon for this to happend eventualy. the short term answer is to replace the transfer cas or have the transfer case rebuilt A ...

...transfer case fast enough causing the bearing inside the transfer case to fail. Try to gate your 4WD repaired soon if it's tuck in 4wd low. Keep me posted if that is the case and be happy to help you ...

...transfer case is dry or bad forks/rails seized , or there transfer case bad. shorter answer, shift devices bad (vacuum servos) or bad transfer case, (ran it dry?) to shift to 4wd, try it on dirt, or ...

transfer case and detect the speed of the front and rear driveshafts. This input is used by the generic electronic module (GEM) primarily to control A4WD operation. The throttle position output signal

...Transfer Case System Description (Selectable 4WD) The New Venture Gear Model NV243 is an electronically controlled optional transfer case for use on four wheel drive K trucks. The driver selects 2HI, ...

Transfer Case -Automatic Four Wheel Drive (A4WD) An not Transfer Case -All-Wheel Drive (AWD) Two different system's . The automatic system is electroniclly controlled . When it has electrical problems

...transfer case may malfunction causing the the tranny and/or transfer case to switch from drive to neutral a few times fast. Also if you have an automatic tranny, start by checking ALL the oil levels ...

...transfer case,loose manual shifter 1986 s10 4x4,transfer case,when trying to shift in the shifter feels real loose,it wont stay in 4 hi,slips back into 2wd,but when held in 4wd hi it turns shaft ...