...Neutral Safety SwitchPrint REMOVAL & INSTALLATION The back-up light switch is incorporated into the neutral/park safety switch. The neutral safety switch on 1988-94 models is mounted in the ...
...neutral switch. make sure that the slots on the switch are lined up with the lower tabs on the tool. Rotate the tool until the upper locator pin on the tool is lined with the slot on the top of the ...
...Install it in Neutral with the Shift indicator in Neutral. Tighten the Bolts and make sure the Park indicator is in Park and the movement of the Cable is correct. you may have to make multiple ...
...install a push button start on my 94 c1500 suburban? Sure can. cut the yellow wire off the ignition switch under the dash. Run a fused wire (40 Amp is good) from the battery to the push button. Put ...
...Install the Park/Neutral switch and loosely install the bolts. Adjust the switch and torque the bolts to 48 inch lbs. (5 Nm). Install the control shaft lever. Install the control shaft cable and ...
...install: This adjustment is performed with the switch removed from the vehicle. Neutral position tool J 41364-A or its equivalent is required for this procedure. Position tool J 41364-A or its ...
2,884 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions