1994 Jeep Grand Cherokee "check glow plug system" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...check engine light or codes - Also in this system is an ambient air temperature sensor - telling the computer the air/motor is cold and needs to enrich-en the fuel mixture as an old fashioned choke ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...GLOW PLUG TIME (DIESEL ONLY) FAILED COUNTER REACHED (START) HAZARD LAMPS (SWITCH PRESSED) IGNITION IN RUN/START IGNITION NOT IN LOCK IGNITION SNA (SIGNAL NOT AVAILABLE FROM OTHER MODULE) INVALID KEY ...

Ad

...check spark plug tips and they are dry. (wet is flooding) DRY ! i suspect low or no fuel pressure, i know from experience that fuel pumps about 75% do not run only key on, only cranking and running ...

Question about Jeep Grand Cherokee

2 Answers

check for cracked wires to the crank position sensor as it is reported that if that insulations is not in good condition then the sensors will give an intermittent problem that is called engine stall,

...check the WAIT TO START lamp but not energize the glow plug relay. The glow plug ON time varies from 0-120 seconds depending on battery voltage, engine oil temperature and barometric pressure. The ...

Check engine light on lost communication power train control module but runs great DTC P0671: Cylinder #1 Glow Plug Control Circuit DTC P0672: Cylinder #2 Glow Plug Control Circuit DTC P0673: Cylinder

Question about Jeep Grand Cherokee

1 Answer

glow-plug wire to check for continuity. 2. If the light comes on, check the other cylinders in the same manner. If the test light failed to light, check for continuity at the glow-plug relay. 3. If no

...Check Glow Plug Wiring. Check Glow Plug. Error Code: P0675 Description: Glow Plug Cylinder 5 Circuit - Circuit Malfunction Causes: -No Pre-Glow Period. -Poor Cold Starting. -Glow Plug Wiring faulty. ...

Question about Jeep Grand Cherokee

2 Answers

glow-plug wire to check for continuity. 2. If the light comes on, check the other cylinders in the same manner. If the test light failed to light, check for continuity at the glow-plug relay. 3. If no

...check glow plug (test light clip on positive ) touch wires going to glow plug should light up if ok (quick test ) if any fail replaced if all seems ok look at the oil injection system most common ...

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

2,884 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...