...cruise control system does not use engine vacuum, it uses it's own vacuum pump. Vacuum runs from the pump/control module to the vacuum reservoir that pulls on the throttle cable. The is also another ...
...Remove or disconnect the following: The cruise control cable from the module The electrical connector The mounting bracket bolt from the cruise control module The cruise control module from the ...
...cruise control of a 2003 Alero? The cruise control works, sporadically, so I know that it does work, just not all the time. The indicator light is lit, so I know there is power going to the system, ...
...Remove the cruise control cable, if applicable. Remove the bolt from the fuel line retaining clip. Disconnect the 11-pin harness connector for the ignition control module (ICM). Remove the bolts from ...
...cruise control cables to prevent bending the cable housings. Remove the transmission fluid filler tube. Disconnect both of the heater hose clamps at the heater core using the J 38185. Remove the ...
...Cruise Control Module (CCM), Cruise Control Release Switch, Cruise Control ON/OFF Switch CTSY LAMP 10A Body Control Module (BCM) DRL 10A Daytime Running Lamps (DRL) Control Module HVAC/DIC/DRL/HEATED ...
Question about Seat Cars & Trucks
...cruise control module is easy to locate. It has a cable going to the throttle body and most times runs right next to the cable front the gas pedal. It's a big block and guess it's about size a cell ...
Question about Audi 100
...cruise control actuator located on the firewall in engine compartment remove the cover and see if the ribbon is broken that actuates the cable to the throttle,then ck the brake switch adjustment,if ...
...remove the cruise control cable. I am not a mechanic and the whole process only took me an hour or so. I replaced my ignition module to fix the heater and AC operation. It also fixed the cruise ...
Question about Cars & Trucks
...cruise control servo motor the cable is bad, sticks&rusty , I'd remove it and live a long life on your next newer care the PCM sees this event and goes t0 max 20mph limphome mode, safer. i'd pull ...
115 questions posted
Usually answered in minutes!
72 Questions
53 Questions
33 Questions
1 Questions
18 Questions