1987 Subaru Gl 4WD "carb problems" Questions

...problems Engine running lean, gum-out increases engine speed at idle and if goosed. EGR valve was leaking, replaced it so now it idles. Before EGR, just wouldn't idle. Fuel filter recently ...

1981 GL STALLING PROBLEM!!!!! HELP PLEASE HI, I have a 81 subaru gl with 1.8l carburated engine. I recently bought a new inline fuel pump because the one that came factory just about rusted off the ...

carb. What am I missing? I have only owned this car a couple weeks, and it died the second day I owned it. Check the static timing. i would suggest to get the CO measured as sound's like to strong mix

gas in oil!! i have a 87 subaru gl 4wd ,carb. wont go over 50 mph its getting no more than 12 mpg and the rest of the gas is ending up in the oil. rings are good, im SURE the hoses/vacuum system is ...

...carb EA82 screwed into the exhaust pipe either side of the cat converter, if having running/mpg problems i'd recommend using a fuel addative specifically designed for the cat as well as the valves ...

I have 1988 subaru Gl AWD it says on air intake that it is a F i its not a carb is it thottle body ? Also does this type have an injector if so where? My most important question is this , It appears ...

454 carburetor motor cranks will not start. New battery,electric fuel pump and has spark. For carburator engines the common problem is the chock is to lean. Please follow this link. It shows how to ...

87 Subaru GL Carb/AT. The car starts well and idles. The problem is I have no power going up hills. Flooring it, I go 30-35. I can put the car in nuetral and rev it all the way up so it's not a ...

...be sure but i suspect a fuel problem ,but would need more information like is it fuel injection or carb ,iam in europe and these cars still had a carb on at this age till 92 when the laws ...

1986 subaru gl wagon non turbo stays idiling at 2500 my friend told me to turn both screws on the carburator to the left a few turns,that dropped the idiling down to 1500rpms then i turned the screws ...