1999 Lexus Gs 300 "heat cold" Questions

cold air only, car has dual controls but acts like heat flapper not opening your blend door on your passenger side is most likely stuck in the cold position. Chances are you cable is broken. Good luck

WHEN I TURN ON THE HEATER THE DRIVERS SIDE HEATS UP AND THE PASSENGER SIDE ONLY BLOWS OUT COLD AIR. THE A/C MAKES A HUMMING NOISE WHEN I FIRST START CAR? AND THE RUG USE TO GET WET ON PASSENGERS SIDE.

...heat from the A/C. HAVE THE RADIATOR CLEANED (PULL THE RADIATOR OUT AND HAVE PROFESSIONAL RADIATOR SHOP ROD IT OUT), ALSO MAKE SURE NO AIR DAMS FOR THE RADIATOR UNDER THE CAR MISSING OR DAMAGED, IF ...

...heat/defrost is cold Ford Windstar SE, 3.8L V6, 1999, front seat heat/defrost is alway cold with engine warm and heater turned on. 1) When (engine is warm and) front seat heat temp slider is moved ...

...heat just cold air but when im at a stand still, parked my heat works Put a piece of cardboard in front of the radiator. Only if it's cold out though, Usually in really cold weather, the cooling ...

Heat blows cold on drivers side and hot on passenger side? http://schematicsdiagram.blogspot.com/2011/12/heat-blows-cold-on-drivers-side-and-hot.html ---------- No heat, blower blows only cold? http:/

...cold air turn heat on Search Results 07 Tucson heater blowing cold air - Hyundai Forum - Hyundai ... www.hyundaiforum.com > ... > Vehicle Line Up > Hyundai Tucson Dec 16, 2009 - I have a 2007 Tucson, ...

...Cold heat to the windshield. Lukewarm out front vent. 1998 Tercel. No heat to the windshield. Some lukewarm heat when the front vent is selected. Air is blowing, but lukewarm Temperture gage is at ...

Heat blows cold on drivers side and hot on passenger side? http://schematicsdiagram.blogspot.com/2011/12/heat-blows-cold-on-drivers-side-and-hot.html ---------- Hot air on the driver's side vents only

...area in front. This model has a rear heat/cold blend door actuator. Its an electric motor that moves the duct door from hot to cold. When they wear out, they're usually stuck on the last ...