1997 Jeep Wrangler "door latch" Questions

is misaligned, consider new hinge bushings, a misaligned door can cause damage to the door, and put tension on the door latch in a direction that puts pressure on the latch that it wasn't designed for

...latch itself,that latches the door,and look for the lever that locks the latch,it will be sticking out of the latch,and try and release the lock by moving the lever. I also have a '97 wrangler. the ...

...door latch will not lock in to place. It is below freezing and I dont know if the door is broke or the latch is just stuck Likely it's just stuck. Spray it with wd 40 or other solvent and make sure ...

...door handle to bend the latch back to where it should be. Does anyone know how to remove it? The handle is held in place by two vertical wedges on both sides of the handle. To remove just force the ...

...door latch. What i did from this point is to use J/B Weld to attach the rods back to the clips. Clip are not reusable and for the fix from the Dealer they want to replace the latches and rods.Hope ...

door latch to the inside lock/unlock lever,, if you can make a 'L' shaped tool out of some stiff wire and put a small gripping bend in the lower end to grip the linkage -- you might be able to wedge a

installing new door latch You will need to remove door panel.then unhook rods and any wiring, and remove bolts from latch.

...latch itself on the door is probably froze up. spray it with blaster and just let it soak, spray it again and pull the handle lever right where it meets the latch pul back and forth while pushing on ...

...door latch inside the door, once reached you can operate it and release it to open the door, I will tell you that the likely hood of damage to the door panel will probably occur, I have had this ...

...door latch assy, inside out, with WD-40 first. Even if you have to put window down & aim spray nozzle from top at area of latch, and soak it. Stick the nozzle inside the key slot also, and give it a ...