1993 Jeep Grand Cherokee "ignition olds" Questions

how to change ignition switch need to remove old ignition switch and put in a new one. Do you mean the ignition key lock or the actual switch, 2 very different things.

Ignition on my 2004 jeep grand Cherokee is locked, how do I unlock the ignition? Keys goes in ignition, door chim works when key is in ignition. But the key won't turn it's stuck. tap the ignition ...

truck backfireing need help Common causes of backfire are:1. old ignition wires, cap, rotor or arcing coil.2.burned valve, worn cam lobe 3.exhaust leak in manifold or pipe above converter, permitting ...

how do you replace the ignition cylinder on a 1998 grand cherokee Try these steps... Step 1 Disconnect the negative battery cable from the terminal on the battery. Remove the upper and lower steering ...

my ignition wont turn to the off position fully or turn back to the acsessories.i cannot get the key out of ignition at all.but its almost there.it goes into park just fine my key doesnt go back to ...

...setting for a couple of hours. Obd doesn't indicate any problems. Engine check light not on when ignition switch turned on. eventually without doing anything you'll hear the fuel pump prime, the ...

Don't know how to get old ignition switch out to put new one in. How to remove an ignition cylinder for repair or replacement if your Grand Cherokee's ignition won't turn. This is due to ...

...do some testing to find the problem. Test procedures are in most inexpensive manuals. Of course if ignition parts are old, it does no harm to replace them, along with air filter etc. Never "cheap

96 grand cherokee starter stays engaged V6 The ignition switch under the dash has been shorted and has a diode of some sort stuck in it. Done by a previous owner. The relay gets hots after the car ...

original key will not move the ignition You will need a new key switch in the ignition problem is that the tumblers are worn or stuck and will not function. Switch generally runs about $15. to about ...