1993 Jeep Grand Cherokee "hammer drill locked" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...dry graphite in the lock cyl and wiggling the key. You can also try tapping on the lock cyl with a hammer while working the key to see if you can rattle loose seized tumblers. If none of this works ...

Ad

Question about Jeep Grand Cherokee

4 Answers

...dry graphite in the lock cyl and wiggling the key. you can also try tappin on the lock cyl with a hammer while working the key to see if you can rattle loose seized tumblers. if none of this works ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...hammer and a hand chisel, and be careful not to break or bend or snag or puncture anything but that stud. 2nd way you might get lucky take off all the reset of the lugs and turn the damaged stud to ...

...DRILL OR SLIDE HAMMER ANYTHING on the steering column!! ( that's red neck car thief ****!!!) Disconnect the battery before you start this .. AND GET ONE OF THESE!!>> Advance Auto Parts Down for ...

Question about Jeep Grand Cherokee

1 Answer

Drill the keyhole and stick a slide hammer (dent removal tool) with a threaded bit. Once threaded bit is secured in the hole you just drilled, pull the slide hammer action (like pulling a dent out) so

to the fuel tank, then: 1. Thread a slide hammer into the key slot and pop out the lock mechanism. or 2. Using an air driven drill, drill out the cap with a nice step-drill bit. or 3. Call a locksmith

...and good quailty drill bit,hammer,punch,and some good luck...In some cases we are able drill the lock pin just be very careful not to damage thr aluminum housing.Oh yeah better wear safety ...

Question about Jeep Grand Cherokee

2 Answers

...Drill out the lock cylinder (bad idea, possible debris entering fuel tank). Or my personal preference: big channel locks. Your going to have to ruin the gas cap or spend the money on a locksmith. Use ...

Question about Jeep Grand Cherokee

1 Answer

...hammer and cuts it out in 5 minutes or drill it for an hour. Anyways after that you will find the shift interlock cable has a locking black head clip. use 2 small flat screw drivers and pop it free. ...

Hammer Drill. The lock button is stuck on, cannot switch off, have to take plug out of socket hi john. sounds like the switch will need to be looked at, so it will need to be opened up to see why this

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

2,181 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...