2004 Cadillac CTS "abs brake" Questions

...ABS without losing brake lights? Having issues with our ABS system. Pulled the fuse, as recomended on other forums. This resolved my ABS issue but also turns off all braking lights. Is there a way ...

...ABS without loosing brake lights? Having an issue with our ABS System. Some forums mentioned to pull the ABS fuse. I did, and it fixed the braking issues, but I lost braking lights. Why would an ABS ...

...abs brake and traction lights are on replaced shifter wire car is not in park anymore but abs brake and traction light is still on. Also, resurfaced rotars and put hardware clips on front brakes. How ...

...Brake Service Assistant. I was just driving it tonight and got T/C and ABS lights came on. Please advise me if you can about what needs to be done about these brakes, on my 2006 CTS Cadillac. Will ...

ABS LIGHT COME TURN ON ALSO BRAKE AND TRACTION CONTROL(TC) need to get abs codes read. it will tell you what wheel to look at. 1.bad wheel bearing, sensor is part of bearing. 2.broken wires to sensor.

...ABS and Service brake assist lights are on after changing speed sensor. I have switched out the wheel speed sensor on my cts 04 and the tc,abs and service brake assist lights are still on. The code ...

...ABS and TRAC control lights to illuminate and both systems will be disabled until the fault is gone. I would have a good service facility or dealer look at this one. One quick check you can do is to ...

brake & or ABS sys. NOTE; TRY TO RESET THE SYS. BY Just ; 1. Dis-connect the battery negative cable, while the ignition switch in the ON position {Don?t Run the engine}. 2. keep it Dis-connect for

...abs and service brake assist lights are on I have switched out the wheel speed sensor on my cts 04 and the tc,abs and service brake assist lights are still on. The code shows up as c0040 which is the ...

...brake shop because your brakes are not functioning normally. A likely cause of the the traction and ABS lights coming on without an obvious reason, such as a slippery surface, is that the signal from ...