1992 Cadillac DeVille "idle control valve located 1991" Questions

control module. Check your EGR valve. Easy to remove and check for buildup. First remove EGR valve (located near the intake) and check for carbon buildup on the two ports. Remove all buildup to ensure

...the 'idle air control valve located' for a 1991 nissan 300z fairlady non turbo? mcdevito75 here, The Nisson dealer will have it"s location, or ant parts store may have a manual showing it"s

idle airspeed control valve,(iac) is ok....check the sensor wires located on the air cleaner assembly if the air flow sensor is gone,it will not run proper. start with a good tune up ....correct plugs

...idle air control valve and the third one is a bit thicker than the two. It is used as the air release tube for the idle air control valve, (if the valve is separate from the throttle body). If the ...

...can cause it to surge on the rear of the engine on passenger's side connected to the upper radiator hose. these honda had problem with the idle control valve, it stuck open cause the engine to ...

...idle control ,, they just have different locations,, older ones are under the throttle body facing the firewall, and newer ones its in the front,, Just clean this valve up and your problem will go ...

idle air control valve...or should locate EGR valve and check there...or something else...??? Thanks for using FixYa and welcome to the site Clay. It could be either one of them. The only thing, there

...idle air control valve located on or near throttle body is dirty and sticky you have to remove and clean valve pintle and passages of grease and carbon also clean throttle body and plate use only air ...

idle air control valve, if you are having problems with your idle being to high or low you may need to replace your idle air control valve, go to your local auto zone or auto parts store and get a new

...idle control valve , its located in the air tube that leads to the throttle body of your motor,, also, clean the throttle body with carb cleaner, just remove the air tube leading to the motor,, clean ...