2002 Audi A4 "cooling system bleeder screws" Questions

Ad

...cooling system? hi. how do you bleed the cooling system on a 2.0litre audi a4. (2002, b6)? bleeder screw on metal water pipe above inlet manifold. loosen bleeder screw, fill coolant at coolant ...

Ad

Question about Audi A4

2 Answers

...bleeder screw on the rear of the engine on the coolant pipe that uses a 5mm hex head to drain the air in the system. There is also a bleeding procedure that involves taking the heater core hose clamp ...

Ad

Question about Audi A4

1 Answer

cooling system is air bound, how can I bleed it out? Look for bleeder valves somewhere on the top of the cooling system. If you see any use them to remove trapped air. Start the engine and slowly turn

...cooling system, and now you are ready to fill it back up. So pour in the proper coolant mixture for your car in the cooling system reservoir until it comes to the top, and you cannot add any more. ...

Question about Audi A4

3 Answers

...cooling system properly. Open the cooling system bleeder screws. Slowly fill the cooling system with a 50/50 coolant mixture until coolant runs freely out of bleeder screws. Close the cooling system ...

...cooling system. You will need to bleed system cold just open bleeder screw on top of waterpump then fill cooling system till coolant runs out of bleeder. Snug bleeder. Then run till warm loosen ...

Question about Audi A4

1 Answer

...cooling system . some vehicles have a bleeder screw in which you would remove the screw and add coolant without the engine running until there is no air bubbling out of the hole that you removed the ...

...cooling system,there is a bleeder screw near the thermostat housing,just loosen it,and pour coolant in as it comes out the bleeder,watch for air to escape the system.Then close the system back ...

...cooling system as the air is creating a pocket inside the engine, make sure you do this when the engine is cool, if there are no bleeder screws try taking a heater hose loose and fill the radiator ...

bleeder screw at the highest point of the coolant system, it is usually located on the thermostat housing. Once located open screw with engine off and cool, and pour coolant into the coolant resevoir/

Not finding what you are looking for?
2002 Audi A4 Logo

1,127 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Audi A4
2004 Audi A4

747 Questions

1996 Audi A4
1996 Audi A4

638 Questions

1998 Audi A4
1998 Audi A4

616 Questions

2001 Audi A4
2001 Audi A4

604 Questions

1999 Audi A4
1999 Audi A4

512 Questions

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...