1997 Audi A4 "adjust high beams" Questions

2003 A4 low beam adjustment There appears to only be one adjustment screw for the low beam light of the front headlight cluster. How is the adjustment made? The high beam has 3 adjustment screws and ...

... high beam F19 (10 A) - LH headlamp - high beam F20 (10 A \ 15A) - RH headlamp - low beam, headlamp adjustment F21 (10 A \ 15A) - LH headlamp - low beam, headlamp adjustment For Audi A4 the fuse box ...

...High beams work fine-All bulbs good. Rear all fine, front drivers turns still ok -2002 Audi A4 For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand ...

...high beams on at all times, and even then, they only project about 10 feet from the car. Would you know how to angle them higher? Thanks! most of adjuster remove out from the bracket in side due to ...

...high beam pattern will be correct when the low beams are properly aimed. Turn the headlamps On and select the Low beams. Rotate the headlamp vertical adjustment screw (2) on the inboard side of each ...

...mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall. For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the

...adjust is high beam and the low beam will be automatically adjusted. Th adjust high beam (after dark) place the vehicle on level ground about 3 feet from a wall. Turn on high beam and you will notice ...

...adjust the low beam headlght on a 2006 Sabaru Tribecca B9 I have a similar problem. The adjustment screw adjusts both the high and lof beams. After changing the passenger side low beam, both sides ...

...High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall. I suggest you take to to a GM dealer and have the lights adjusted. They have all the tools ...

How do I adjust my high beams on my 2001 Chevy impala? high beams are adjusted by adjusting the head light assemblies. when on high beam