how to replace the ignition switch on a 1993 audi 90s Ignition switch is on the opposite side of where u start the vehicle with the key, so u have to take the ignition off may have to take the radio ...
...cluster is very sensitive. Even having bulbs out can mess it up. You should consider replacing the ignition switch. It is easy you can do it yourself, do NOT let Audi dealer's service tell you it's ...
...SPARKS CABLES NO HAVE POWER I think you may have an Igniter problem. If you can locate it in the ignition system then change it. A secondhand one will do. You should then get the spark your car ...
ignition sitch fails to operate ignition switch responds as if it will not engage the starter. Acts as if it is broken internally IT IS BRKEN......U ARE CORRECT U NEED TO CHANGE IT.......
How to replace an ignition switch, to a 1993 Audi coupe 2.0 that's easy, remove instument cluster,remove bottom shelf (above brake pedal,) now u have acsess to ignition switch.reach thrue instrument ...
...is okay. We will star a list of what is good.and what controls spark 1. crank sensor .you done it 2.ignition control module. located on the center of bulkhead,behind intake air hose 3.coils. you ...
...LICENSE CAR REGISTRATION.AND THEY WILL HAVE YOU A KEY MADE.HOT WIRING CAR WONT WORK.YOU NEED THE IGNITION SWITCH WHICH TAKES POWER TO IGNITION SYSTEM AND
...ive cleaned all cables from batt both neg and pos. please help Check for voltage at the coil or ignition module. If there is dc voltage, then check for ac voltage at the coil. Do It Yourself ...
I have a 1990 Audi 100 (NON QUATTRO) and had the ignition switch fail. I have the shop manual and carefully followed the procedure for accessing the switch. I have the steering wheel off and the ...
car just died with no signs of problem, doesnt apear to have spark, but does get fuel 1993?? try changing the ignition module under the coil
115 questions posted
Usually answered in minutes!
75 Questions
34 Questions
26 Questions
26 Questions
30 Questions