2000 Acura Integra "fuel gauge reads full" Questions

...Gauge only reads full sounds like an earth problem, check wiring connector to fuel sender unit, workshop manual will give you step by step instructions or visit u-tube and search for a video showing ...

...fuel gauge is working by disconnecting the fuse from the panel, if gauge reads e then ground the fuel gauge if it reads full then the fuel gauge reads fine the its the float sensor in the fuel tank. ...

fuel gauge not working all the time. I have a 2006 Mercury Grand Marquis. Today my tank was HALF FULL,, so I filled it up. I put $20.00 worth of gas in it. As usual, I started clearing my message ...

fuel gauge "stuck" on full? Installed and gauge reads full always. Dropped the tank and gauge reads correctly reinstalled tank and gauge reads full again A wire or connection is getting shorted during

Fuel gauge does not work porperly. When the tank is topped off, the fuel gauge reads full, but after much driving the gauge only drops to 3/4 a tank and slowly to half of a tank on the gauge read out.

...fuel gauge full when it is empty my fuel gauge always read full and is empty The fuel level sending unit inside the fuel tank is bad or the gauge is or there is a wiring problem This video is for a ...

fuel gauge. The sensor is built into the fuel pump. The contacts on the sensor become corroded over time and cause the sensor to malfunction causing your fuel gauge to read full all the time. I have a

...fuel gauge reads past full all the time. the tank and sending unit and gauge are new I removed the sending unit wire and its still goes past full. How can do to correct this problem. I have a good ...

fuel gauge reads half full when fuel goes down gauge goes towards full mark You have a bad ground, you will have to remove the fuel tank and check the connectons on top of the tank, probably corroded.

...fuel gauge is'nt working.I tryed to ground it I have a 91 chevy truck that the fuel gauge is'nt working.I tryed to ground it and check the power and it still reads full. put a differant gauge in it ...